32 Channel Network Video Recorder
Feature:
- H.265+/H.265/H.264+/H.264 video formats
- Up to 32-ch IP camera inputs
- Up to 1-ch@32 MP/2-ch@12 MP/16-ch@1080p decoding capacity
- 8 SATA interfaces for HDD connection
- HDD hot swapping with RAID 0/1/5/6/10
Specification:
|
Model |
SD-N9G32S8 |
|
Video and Audio |
|
|
IP video input |
32-ch |
|
Up to 32 MP resolution After ultra HD resolution mode is enabled, the NVR support up to 4-ch 32 MP/24 MP IP video inputs. |
|
|
Incoming bandwidth |
320 Mbps |
|
Outgoing bandwidth |
256 Mbps |
|
Incoming bandwidth (RAID mode) |
200 Mbps |
|
Outgoing bandwidth (RAID mode) |
200 Mbps |
|
HDMI1 output |
4K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 1920 × 1080/60Hz, 1600 × 1200/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz |
|
HDMI2 output |
1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz |
|
VGA 1 output |
1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz |
|
VGA 2 output |
1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz |
|
Video output mode |
HDMI 1 and VGA1provide simultaneous video output, and work as the main output; HDMI 2 and VGA2provide simultaneous video output, andwork as the auxiliary output |
|
CVBS output (optional) |
1-ch, BNC (1.0 Vp-p, 75 Ω), resolution: PAL: 704 × 576, NTSC: 704 × 480 |
|
Audio output |
2-ch, RCA (Linear, 1 KΩ) |
|
Two-way audio input |
1-ch, RCA (2.0 Vp-p, 1 KΩ, using the audio input) |
|
Decoding |
|
|
Decoding format |
H.265+/H.265/H.264+/H.264/MPEG4 |
|
Recording resolution |
32 MP/24 MP/12 MP/8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF *: After ultra HD resolution mode is enabled, the NVR supports up to 4-ch 32 MP/24 MP IP video inputs. |
|
Synchronous playback |
16-ch |
|
Capability |
1-ch@32 MP (30 fps)/2-ch@12 MP (20fps)/4-ch@8 MP (25fps)/8-ch@4 MP (30fps)/16-ch@1080p (30fps) |
|
Dual stream recording |
Support |
|
Stream type |
Video, Video & Audio |
|
Audio compression |
G.711ulaw/G.711alaw/G.722/G.726/AAC/MP2L2/PCM |
|
Network |
|
|
Remote connection |
128 |
|
Network protocol |
TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS |
|
Network interface |
2, RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface |
|
Network mode |
Net Fault-Tolerance, Multi-address |
|
RAID |
|
|
RAID Type |
RAID0, RAID1, RAID5, RAID6, and RAID10 (at least 4TB for each HDD) |
|
Auxiliary interface |
|
|
Serial port |
1 RS-485 (full-duplex), 1 RS-232, 1 keyboard |
|
SATA |
8 SATA interfaces supporting hot-plug |
|
eSATA |
1 eSATA interface |
|
Capacity |
Up to 10TB capacity for each disk |
|
Alarm in/out |
16/4 |
|
USB interface |
Front panel: 2 × USB 2.0; Rear panel: 1 × USB 3.0 |
|
General |
|
|
Power supply |
100 to 240 VAC, 50 to 60 Hz |
|
Consumption (without HDD) |
≤ 30 W |
|
Fan |
Speed self-adjustable |
|
Working temperature |
-10 °C to 55 °C (14 °F to 131 °F) |
|
Working humidity |
10% to 90% |
|
Chassis |
3U chassis |